DJI Osmo Pocket 3 Magnetic Base with Multipoint Rail

This is a magnetic holder for the DJI OSMO Pocket 3 gimbal camera. I started out with Chrizzl's design, but as I did not have any square magnets in stock I decided to modify his design. I therefore changed the bottom to take ten 8x3 round magnets (in stacks of two) and - since I'm nuts about all things Multiboard - I also added a Lite Multipoint Rail to the back, so that the base can also be used to store the DJI OSMO Pocket 3.

The magnets will be a press fit and does not require glue, but feel free to use super glue for added support.

CAUTION:

1. Do not have the OSMO inserted in the base when attaching the base to a Multiboard surface - attach the base to the board first and then insert the OSMO. Failing to remove the OSMO first may damage the gimbal.
2. The base is not designed for - nor can it be used as - a webcam holder for the OSMO. There is not enough clearance to the rear for the gimbal to turn when the base is attached to a Multiboard surface. Using the base this way may damage your camera. If you need a holder for webcam use, try this design instead.

Changed the design to use 8x3 round magnets instead of 8x8 square magnets. Also added a Lite Multipoint rail to the back.