slightly smaller Insert for unsleved Cards for the Card Slinger 3.0 - for Magic the Gathering (MTG)
the original STL came out as a press-fit, so i cut 0.3 mm away on all sides.
now there should be plenty of space.
7
88
2
392
updated
March 22, 2025
Description
PDFthis is a REMIX and NOT my own design.
Original here:
https://www.printables.com/model/1034404-card-slinger-30-for-mtg-manabox-app-for-sleeved-an
the original is not allowed to be modified nor to be sold - so ni respect to the original the same counts for this one. if the original author wants this to be put down, i will do so.
the original STL came out as a press-fit on my printer,
so i cut 0.3 mm away on all sides.
now there should be plenty of space.
Tags
Model origin
The author marked this model as their own original creation.
