Tea Caddy, Pot with Lid

Please be aware that food safety is a complex topic and if you are storing food in 3d printed objects, you do so at your own risk.

How to print (recommended)

• Scale: 100%
• Nozzle: 0.6mm
• All extrusion widths: 1mm
• All layer heights: 0.25mm
• Bottom shell thickness: 1.25mm
• Print speed: 1st layer: 15mm/s, rest: 30mm/s
• Print hot and slow with minimal cooling for good layer adhesion

How to print (advanced)

• Scale: Size the model to your liking but don't forget to recalculate the extrusion width.
• Use whatever settings you like.

Finishing touches

• Sand the outside walls of the lid-neck and the inside walls of the pot neck area to smooth out layer lines.
• With the 1mm gap lid: This will be a loose fit and probably won't need any sanding.
• With the 0.75mm gap lid: Recommended. Needs some sanding and then fits nicely in the pot.
• With the 0.5mm gap lid: Very tight fit. Needs a lot of sanding and will give the smoothest and tightest fit.