Keycap / Keysock for Mechanical Lock Add-On for Original Prusa Enclosure

https://help.prusa3d.com/guide/8-mechanical-lock-add-on_360812

https://www.printables.com/model/284122-mechanical-lock-add-on-printable-parts

We have two mostly identical Printers in our school, and both are in the Original Prusa Enclosure with the Mechanical Lock Add-On.
Both Printers are Color-coded (green & yellow)

So to better identify,  i designed a keycap/keysock for them.

The small foot below the key is only there to support the keys weight during printing and obiously as to be cut away afterwards

IMPORTANT:
I've also added various tolerances + a tolerance test ranging from 0.0-0.5mm 
So make sure, you print this BEFORE the final print is happening and you enclose your keys forever ;-)

original Parts unchanged - nothing to worry about here ;-P