Gridfinity-compatible housing for Raspberry Pi

Overview

This is a Gridfinity-compatible housing for Raspberry Pi (Raspberry Pi 3 and 4), designed with flexibility and organization in mind. It's a personal project I made for my setup and decided to share in case it’s helpful for others too.

Features

Supports Raspberry Pi 3 & 4

Compatible with GeeekPi ICE Tower Fan: https://www.amazon.de/dp/B07V35SXMC?ref=ppx_yo2ov_dt_b_fed_asin_title

Gridfinity base: easily mounts onto Gridfinity plates

Stackable design: organize multiple Raspberry Pis vertically

Clean and functional layout with hobbyists and tinkerers in mind

Included Files

.3mf file optimized for Bambu Lab X1C

Standard .stl files for general 3D printing

Original .sldprt SolidWorks files for those who want to adjust or remix

Required Hardware

To assemble each housing, you’ll need:

4 × M2.5 × 6 mm copper standoffs

4 × M2.5 nuts

4 × M2.5 screws

Notes

This is a hobby project, shared in case it’s useful to others. You are welcome to remix or adapt it to your setup. Happy printing! 😊