Motorola MB8611 / MB8600 / MB7621 Cable Modem Rack Mount 1.3U

1.3U rack mount for the Motorola MB8611 / MB8600 / MB7621 cable modem, with ventilated shelf and keystone jack. Also has a screw mount hole to mount the modem directly to the modem tray.

You must remove the base/stand of the modem in order to fit it in the tray, there are 2 screws hidden under the label on the bottom of the base, you can use one of these screw holes to mount the modem to the tray.

Use 8 x 8mm M3 screws and nuts to screw the arms, and longer (12mm and 15mm) M3 screws to secure the cable modem to the tray.

This is 1.3U height, which means it takes up a 1U slot and one of the holes of the slot above it. 

Designed to be printed with no supports in PLA or PETG with the face plates facing down on the printer bed. I printed with Prusament Jet Black PLA, 0.4mm nozzle, 0.3mm layer height.

Shout out to mmason for the keystone jack mount template (https://www.thingiverse.com/thing:3562334).