Mini Plastic Shredder

NOT MY DESCRIPTION - SEE ORIGINAL MODEL FOR DETAILS

Non 3D Printed Parts (non-affiliate Links):

REMIX PARTS:

uxcell Square Aluminum Flat Bar, 2Pcs 1/8" Thickness 3/4" Width 12"

https://www.amazon.com/uxcell-Square-Aluminum-Thickness-Length/dp/B0DPVJRLTS/ref=sr_1_5?crid=1846FFXS0IHRJ&dib=eyJ2IjoiMSJ9.hZiQyu0sT8DGe7AV7ofsVN4Hz0bbXV133sJgeeEJeBEoTLEy4kYnl7pPd01cf5eHn2HXEIaXlI-AkVibbUDEJYlWd5HddcLL4-Ji8KAnXa9__vmwA_sAis0NcDvZ6JfLZFgXfkETnKHyQPZZ3zv4cQs9UQDaTT8qpOqxfhAVuJbTrVeTe3COE5P-YRP0nQjBdeFkmg0Yelfi-wGjFUWtDZhw08nmSkHf-QlQ4gJ2yzZ_SskLgsJ1N75PJYT3qD4g7g8v8csuc7u0oByB50tokEUfvRNfjBMtpgq0CPH6xJQ.Mq_XswR2lQecgmrIPWbhh4j6R3ky8dPV68RzdlOq-dQ&dib_tag=se&keywords=3mmx20mm+flat+bar&qid=1742601705&s=industrial&sprefix=3mmx20mm+flat+bar%2Cindustrial%2C130&sr=1-5

Non 3D Printed Parts (non-affiliate Links):

• Ruler Metal Straight Edge Ruler Stainless Steel Ruler 6 Inch Ruler …: https://www.amazon.com/gp/aw/d/B07R8LWDGP?psc=1&ref=ppx_pop_mob_b_asin_title
• Yakamoz 2Pcs 1/4'' Shank Top and Bottom Bearing Guide Flush Trim Pa...: https://www.amazon.com/gp/aw/d/B07WW39K4N?psc=1&ref=ppx_pop_mob_b_asin_title
• uxcell Knurled Insert Nuts, 120Pcs M3 x 10mm L x 5mm OD 3D Printing…: https://www.amazon.com/gp/aw/d/B0CB8KHW7X?psc=1&ref=ppx_pop_mob_b_asin_title
• uxcell R4AZZ Deep Groove Ball Bearing 1/4-inchx3/4-inchx9/32-inchSh…: https://www.amazon.com/gp/aw/d/B0824W4SZW?psc=1&ref=ppx_pop_mob_b_asin_title

This remix includes a few upgrades, but also mods for the parts I had on hand.

Changed from original:

• Larger Hopper to fit larger pieces of plastic
• Modified body to account for larger hopper, and added funnel in the main body
• Changed Ruler hole size to fit a piece of sheet metal (approx 20mm tall x max 3.5mm thick)

I printed the body with 3 walls in PETG, but the back wall next to the blade got kicked out, so I reprinted it in PLA with 3 walls, and it works well as of now.

I've run lots through it, and highly recommend running scraps to break in the machine before shredding stuff you want to use.

I printed and use both the remixed and original plunger, and the original is good to mix up anything that gets caught in the hopper, but the remix allows for the hopper to be sealed from flying shreds (Be careful!)