ESP 32 Glass Block Lamp

This is an ESP32-based lamp made from a glass block. The ESP32 model used is the ESP32-C3 SuperMini. The dimensions of the glass block are 90 mm × 80 mm × 190 mm. All of the information needed to build this lamp can be found on my post on Instructables:


https://www.instructables.com/ESP-32-Glass-Block-Lamp/

Here are the settings I used to print this model:

• 10% infill
• 0.4 mm nozzle
• 0.2 mm resolution
• PLA
• No supports
• Adhesion ON