2.0 Anycubic ACE Pro Upgrade Kit ( to new S1 Version)

THERE is also a improved version with Silica now, you maybe want to check it out ;) check my profile.
Fully compatible with this version. 

2.0 

Hy everything is new! I've taken another look at every file and optimised it, what's new? 
*I have added roundings to all templates, including those that are integrated into the mounting plates, so the alignment should now be guaranteed to work!

*I have shortened the screw connection, which now creates an angle that presses the filament guide against the lid, please continue to print with support for the screw holes (I don't see an alternative) For all those who have already printed the old version and don't want to reprint everything, I recommend shortening the screw points a little if the upgrade for the upgrade isn't sufficient. 

Hello :)
Please see the PDF for assembly instructions. 

With the new ACE Pro from the Kobra S1, the filament guide has been improved so that the filament does not tangle so quickly. With this kit, you can upgrade the old ACE Pro to the new one.
The dimensions are all the same, I just changed a few things to make it printable, and also split the whole thing into two parts that can be put together to fit on the build plate.

I printed it out of PCTG, but  PETG should do as well, ABS and ASA anyway. I would not use PLA!
Only the spool guides need support because of the screw point.

I have also included a PDF in which I hopefully explain the assembly well.

You have to print the Filament Guides file and then choose one of the set files. I have separated the files as BRIM is only recommended for the spool guides

Happy Printing !!