Flip 7 Compact Travel Box (Big Box Version)

If you want to support my work and all of the free designs I bring to the community consider buying something from my Etsy shop or my Printables Store.

____________________________________________________

***FITS FIRST EDITION BIG BOX VERSION. This version fits cards size 89mm x 63mm. If your game came in a tuckbox (Walmart) it will not fit, print this one instead. 

EDIT 4/4/25: Uploaded a new version of all boxes with one notch instead of two for easier lid removal.

EDIT 4/7/25: Added a new lid design for both versions.

____________________________________________________

Here is a compact box for Flip 7 that is considerably smaller than the original box. FITS CARDS SIZE 89mm x 63mm

- Game title on 4 sides
- Designed for travel or everyday use
- Box doubles as a deck holder during gameplay
- Two color design for extra flair, choose your own colors!
- Fits rule book folded twice
- Fits sleeved cards, pictured with Sleeve Kings Card Game Sleeves 63.5 mm x 88 mm
- Notching lid keeps lid from slipping off

A Note on Different versions:

There are many versions, so make sure you get the right one. You need to print one lid and one box. 

CLOSED VS OPEN: In previous models people have complained that the box isn't fully closed, so I made a longer version with a finger slot. I prefer the “open” version as it's easier for in-game play, but you get to decide what you like best. Look at the screenshot photos for reference. Make sure you print the matching lid (open or closed). 

SLEEVED VS UNSLEEVED: With or without card sleeves, self explanatory. I used Sleeve Kings Card Game Sleeves 63.5 mm x 88 mm during design.

SINGLE COLOR VS MULTICOLOR: The suffix _sc means single color, has less of an indent for the text for printing in one color. The suffix _mc means multicolor. In your slicer right click and select Split>to parts. Then change the colors for printing. 

LIDS: There are three different designs for the lid, so pick your favorite. All use color change at layer height to achieve the colored logo. Make sure you print OPEN or CLOSED to match. The lids are notched to keep them on tightly. If your lid is too tight or too loose scale the width by .1-.2mm until you get a good fit. It should be tight but not impossible to remove. Sometimes pushing on the F area can help it slide. Some gentle sanding can be used in areas that are too tight.

---------------------------------------------------

The Op Games owns the Flip 7 trademark. This custom product is approved but not endorsed by The Op Games.

Happy Gaming!