Smart Orbiter v3 (SO3) Mount – Ender 3 Pro

Parts included: 

• Ender 3 Pro Mounting Plate
• Gantry Clip (need M3 heatset insert for the mounting plate to attach)

See Peuqui's original design for assembly instructions, and download your probe mount parts while you're there!

This model is compatible with any standalone fan mount--I use squirrelf3d's mount for 5015 blower fan.

Print Settings (what I tested with):

• 40% infill
• 3 walls
• I used supports, but you shouldn't need them. YMMV.
• PLA or PETG (unless in an enclosure—then use ASA/ABS)

This model is largely the same as Peuqui's original 5 plus model, but the 3 Pro only has two compatible mounting holes. This causes the plate to be somewhat loose. To fix this, I simply moved the hole in the upper-right corner to use it with a “gantry clip” as used on the Hero Me mounting plate for the Pro 3.

To use this model with a BL/CR Touch, you will still need a holder ("halter" in Peuqui's files) and arm for the probe from Peuqui's original design. If you use the SO3 tool board, it will cause the probe to be offset quite a bit, so you may find it advantageous to relocate the mounting arm to the left side of the plate where the probe can be closer to the nozzle.