Ultimea D60 soundbar VESA TV mount [CONFIGURABLE]

Hanging mount for soundbar using VESA standard and original hanging points of soundbar. Designed with 32" TCL tv and Ultimea Poseidon D60 soundbar, but dimensions and shape are customizable for any VESA and soundbar. Go to OnShape configurator and insert desired configuration before downloading models. Soundbar screw slide-in hole is 1cm long, thus you either configure soundbar to be +1cm away from TV, or pre-mount soundbar first and fix mount to VESA second. Hole is auto-rotated to be always vertical.

You can use original screws to fix mount to your VESA, or if space is available, use provided Screw+Lock models to lock mount to VESA 200 holes of holder not thicker than 3mm.

Mount is to be printed twice (one instance mirrored). Wire cover was tested, but quite loose and for thicker cables may not be usable unless they are bound and shaped to match mount arm path exactly.

NOTE: Although there are "none" and "hole" stabilization modes, I have tested only "screw" one.