Element Earrings CuTe

My wife always complains that I don't buy her flowers. And because I find flowers boring, I designed these earrings for her.
I hope I'm doing you a favor by sharing them with you.

Printing Tips
- I definitely recommend a nozzle diameter of 0.25mm (or smaller) so that the details turn out well
- I used the smallest layer height possible (0.05mm)
- No AMS module is necessary for printing, you can do the color change manually at layer height 0.45mm and 1.45mm

- Printed with OVERTURE Dual Color Silk PLA Filament and Esun Black PLA

Pro tip
Nerds are smart asses! 
1) On the back you will find the crystal structure of the metal 
   - Copper = Face-centered cubic
   - Tellurium = hexagonal
2) Pay attention to the color selection for the special effect. If you make the copper earring copper-colored and the tellurium earring silver-colored, any materials scientist/engineer/physicist will thank you :)

You will still need hooks and eyes. You can easily find these on Amazon. Make sure you use pure silver

 

Happy printing!