Collision free Prusa Standalone drybox (with Tape groove)

Added some clearance needed at the hinge so it doesn't brake when assembling..
Also added some room for a double sided tape to attach the boxes to my printer (I had some 3M VHB tape lying around..). Tape groove is 19,5x119,95mm with a depth of 0,8mm (my tape was 1,1mm thick but needs some compression to work. Leaves a very small yet visible gap in the assembled position.
Also a print for the axles is included, so you don't have to cut the originals.

For the silica balls I like malolo's containers, as those prevent the balls from clogging the outlet when using the hinge in the table. (Don't worry about the 50% humidity - there was no silica in at that time)