Stealth Press flush-cooling pin punch holder mount

This is a flush-cooling pin punch holder for the Stealth Press 1S by IconicFAB. 

under some conditions, insert move up after setting them with the stealth press. This AddOn fixes a pin punc next to your soldering and can be moved down when the insert is still hot to coll it down and keep it flush with the part surface.

I used a 8mm pin punch with the length of 150 mm. It weill be fixed by two M3 grub screws (of using inserts for that :-) )

The inner carriage will be kept up with a spring. I used a simple RC Damper spring (e.g. from Tamiya) with an outer diameter of max 17mm.