Eyepiece Case for 1.25" Telescope Optics, Wider Body Diameter under 47mm

Accommodates standard 1.25" telescope eyepieces up to 1.84" dia (46.8 mm) and 3 to 4.5" length (75-115mm).

WIDER than the original model to fit eyepieces with wider bodies. 
TALLER (30mm additional usable) and MORE THREAD ENGAGEMENT than original model to accommodate taller eyepieces.
TIGHTER CAP has more friction in the THREAD FIT.  Stays in place when tightened. 

Note: You can fine tune the fit of the cap for your preference, or for the idiosyncrasies of your printer, just scale the TOP in the slicer by VERY small increments.  I suggest .1% at a time

WIDER than the original model
TALLER (30mm additional usable) and more thread engagement than original model to accommodate larger eyepieces.
TIGHTER cap has more friction in THREAD FIT.  Stays in place when tightened.