Archer - Oblique Wing RC Plane

Archer is a flyable 3D printed oblique wing demonstrator, with a moving swing wing. The model has a wingspan of 1500 mm and weighs 1.7 kg with a large 4S battery.

This is a version 2 aircraft with a host of improvements from the initial design, including:

• More spacious fuselage
• Wider CG margin
• Improved tail design

You can see my development of the initial version 1 prototype here!

This is a model for experienced RC flyers. Print all the parts from PLA and LW-PLA, add some off the shelf hardware components and fit your own electronics. More information is available in these publically available documents to help decide if you'd like to make this model:

• Full Bill of Materials
• User Guide (inclusding print settings and assembly instructions)

All STLs and .3mf files are in a zip file.

Disclaimer: 

This model is provided as a set of STL files, build guide, and suggested part list only. If you are not experienced in the build and operation of RC aircraft or other UAS, it is strongly recommended that you do not attempt to build or fly this model until you have gained experience on a beginner-friendly aircraft. Building, testing, and flying of the model, as well as ensuring the safety of yourself, the model, and third party persons and property is solely the responsibility of the reader.

For personal use only.