Dragon effector for FLSUN V400

This is a mod for the FLSUN V400 effector to accept a dragon hotend, a customized WWBMG extruder, and a remote-actuated filament cutter.

Sources:

1. https://www.printables.com/model/580837-effector-plate-flsun-v400
2. https://github.com/Armchair-Heavy-Industries/A4T/tree/main/CAD/WW-BMG%20for%20A4T
3. https://github.com/weuzor/bowden_cutter

BOM:

In addition to the BOM's for each of the sources listed above, you'll need:

1. Flanged M2 heatset inserts https://www.mcmaster.com/97171A300/
2. V400 effector plate + LED PCB https://www.aliexpress.us/item/3256805244402359.html?gatewayAdapt=glo2usa4itemAdapt
3. Dragon hotend https://www.phaetus.com/products/dragon-hotend-hf

Installation and assembly notes:

• This mod will permanently modify your V400 effector plate. You must cut away the material indicated in the pictures.
• Inserts go where highlighted in the pictures. M3 inserts everywhere except for those in the filament path and shuttle, which are flanged M2's.
• Drill out the inserts in the filament path with a 2mm drill bit, and chamfer them a little bit on the side without the flange.
• VERY IMPORTANT: place a 6mm long piece of PTFE tubing above the hotend.