Finger Dinger adapter for Greallthy bell

Modeled from scratch on OnShape based on original model to fit the Greallthy bell and the screw that comes with it.

As you can see, my hands are big, but thin. I like wearing it on the first falange, and 24mm fit fine, with some slack. Maybe 22mm would've worked too. Some prefer it on the middle falange, so I made sizes from 18mm to 28mm.

Suggested print settings

• I printed it on PETG, to prevent hot days from deforming it if it was PLA.
  • If you use PETG, I recommend gyroid to avoid crossing lines. That's always an issue for me.
• The screw, you just force screw it in to create the threads. Recommended at least 2 walls to cut through with the screw without breaching the outer shell.

• Supports recommended (almost sure they're necessary). Print Settings

Printer Brand:

Bambu Lab

Printer:

Bambu X1C

No

Supports:

Yes

0.2mm

Infill:

15%