MULTI-TOOL ___ Slide Return Bolt-Action and T-Pull Mod

Easy slide return mod with double sided bolts for bolt-action and T-pull prime 
for the Multi-Tool.

• added larger both sided bolts directly to the slide block 
  (needs one M3 Screw 20-25mm long / OR two M3x10mm screws if you screw from both sides) 
• added a retention to the magwell riser to attach some rubberbands for slide return 
  (2 to 3 household rubberbands)
• designed a picatinny rail delete for the magwell riser to not scratch the hand with the pica rail during bolt-action or T-pull prime.
• reduced the height of the Caliburn Sights (which are great for aiming over the magwell riser)

Other mods for the Multi-Tool as seen in the pictures can be downloaded here.

The files are already pre-oriented.

My print settings for PLA:

0,2mm layer height
5 walls
20% gyroid infill (60% infill for the bolts)
7 top and bottom shell layers
No supports needed.

Thanks to Chris Doughty and captainslug for the files I could use for this remix.
You can purchase the files for the Multi-Tool from Chris Doughty's Etsy shop.

Added both sided bolts to the slide block, added a retention to the magwell riser to attach some rubberbands for slide return, designed a pica rail delete for the magwell riser, reduced the height of the Caliburn Sights