Artillery shell keychain

A basic 155mm artillery shell keychain. The model itself uses less than 2 grams of filament!

For best results, I recommend using the provided print file, as I’ve fine-tuned the settings. Print on a textured PEI plate to achieve the effect shown in the images.

Approximate dimensions: 2mm thick, 60mm long, and 15mm wide. Can be resized to fit your needs.

Important, read before printing:

Painting: The lines are not visable when the model is in one colour. Please enable “smart infill” and hover over the model to reveal the lines. Place the painted side of the model face-down on the print bed. Instead of using "lay on face", rotate the model manually using the "rotate" function to ensure it sits level on the bed.