Wheelbarrow Flower Pot

Assembly

You will need one M3x12mm hex bolt for the wheel.

To attach the tub, the optimal choice is countersunk M3 bolts up to 7mm in length. However, a regular M3 hex bolt (up to 6mm in length) will also work. (Note: Countersunk bolts are measured by their total length, while hex bolts are measured by the threaded part.)

Pay attention to the legs—one side has a small cutout that must face the outside of the handle. There is a left and a right side, but there are no markings. 

The same applies to the handles regarding that there is a left and a right side.

Look closely and I'm sure you'll figure it out. 

Printing Options

The wheel can be printed as a single piece or split into multiple parts for multi-color or multi-material printing.

Printing Tips

The tub can be a bit challenging to print with perfect visual quality. To achieve the best results, consider using a lower layer height, optimizing your print speed, and ensuring adequate cooling.

I printed mine with PETG, 0.2mm layers and with no supports.

.