Cable holder thingy

The cable thingies have arrived!

These little guys will grab any cable mess you have around so you better watch out!

No, really. This cable thingy can hold on to any standard EU AC power plug (or Europlug) and organize the cable that comes with it.

It is super convenient for phone chargers! but it works as well with just about any power chord or charger made to the same standard size.

We've included different sizes of the cable holding part, to suit different types of cables.

• 9 mm - USB and thinner cables (tighter fit)
• 12 mm - our standard for USB phone cables :)
• 15 and 18 mm work well with power cables of other devices. We use one with a soldering iron, an air purifier, and even a laptop charger! We look forward to seeing your prints! :)

Print Settings

Supports: No

Layer height: 0.2 mm

Infill:  5%

Notes: 

We suggest you use at least 3 perimeters.

This design fits different charger sizes! 

Follow us / support

Did you like this design? Follow us on Instagram! We are @twothingies

If you really like what we are doing and want to support us, you could buy us a coffee or two!

Selling prints of our designs

Please be aware that our designs are available for free for non-commercial purposes only. 

If you would like to sell 3D prints of our designs in your store, you can join one of our membership tiers!

If you have other ideas, we would be happy to discuss that with you! Please send us a message if you are interested at [email protected]

Disclaimer

Due to the different properties of 3D printing filaments and the tolerances of different machines, you might need to scale up or down some of the print files, in case they don't fit when you print them.