Basket/Garbage clamped to the table - 70 mm clamp

This is a remix for a really nice bin that looks and functions really well. I just have an area that required a taller vice. This remix has an area that covers 70 mm. I've also added a bolt plate to protect the surface as the screws are tightened. I did not change the size of the screws but did create a separate .stl incase you want to print them separately.

Printed in Elegoo PETG Black

I used the same settings as recommended by the original model:

NOTE: Information below is copied from the original model and yes, these are the settings I used.

Recommended print : 
For basket / Garbage : PLA
0,2 layer
Wall 3 
Infill 25%

For vise / clamp : PLA/PETG
0.2 layer
Wall 2/3
Infill 15% + 
.....
Supports are not needed, but you can't go wrong, a sure thing is a sure thing.
.....

Larger hight

Screw protective plate