This model represents the Tree used at the start line of drag racing strips. LEDs of 3mm and 5 mm sizes can be installed and powered from some race control software systems (eg Drag Race Coordinator. The LED holders will need reamed appropriately to accommodate the LEDs and a suitable base created by the user to suit their raceway.
If you want Winner Lights on top there are holes to accomodate the lead wires of LEDs sitting on top of the tree. These holes may need adjusting to accommodate the chosen size of LEDs.
This is a simple structure with no provision for concealed wiring or mounting.
Height is 120mm.
No Time To Lose
The author marked this model as their own original creation.