Australian Grand Prix 3D Miniature (MultiColor)

3d miniature of Albert Park Circuit in Melbourne, Australia!

Includes a colorized version highlighting the Grand Prix circuit!

AMS and MMU compatible using the .3mf files. 

I'm primarily a Bambu user so let me know if the MMU file doesn't work!

Also includes a single-color model.

I also have an updated fully Multi-Color version of this model (and many other exclusive miniatures) available for free on MakerWorld!

Collection of all my miniatures: https://www.printables.com/@jarvizar/collections/1124416

Slicing & Printing Details

This model was designed to be printed with a 0.4mm nozzle and 0.16mm layer heights. 

Try using a 0.2mm nozzle (0.08mm layer heights) or scaling up for even finer detail!

Note: If roads or smaller details disappear after slicing, try lowering the extrusion/line width of external perimeters (outer walls) closer to 0.4mm OR use Arachne walls. Can also try enabling “Detect Thin Walls”. 

Feel free to reach out if you run into any other issues!

Framing Details

This model measures almost exactly 6.7in by 4.7in (170.5mm X 119.5mm) and should fit most 5x7 frames (assuming frame lip/overlap is around a quarter inch). Feel free to change the scale/size of the model(s) to meet your needs.

Personally I use these cheap frames from Amazon: https://www.amazon.com/dp/B0C8HY7YSQ

And blue printer paper: https://www.amazon.com/dp/B00006IDQT

I also included a fully printable frame (including a 1mm thick water plate) designed to fit all my miniatures.

A frame is not required! This model looks great by itself and can be displayed almost anywhere.

Other Details

Model created in Blender using the Blosm addon.

See my Patreon for a commercial license, early downloads, polls towards future models, and more!

Buy me a coffee :)