Bigger Filament Transparency Calibration Test Card

(Yet another) remix of a filament transparency test card.

0.2mm - 1.8mm

Must be printed at 0.2mm layer height for all layers.  Highly recommended to set infill to 100% and “Rectilinear”

Included is a modifier mesh for just the “test zone” - this lets you easily set the infill to 100% for just the testing area if desired.
 

• Bigger
  • label area is taller, accommodating 0.5" (18mm) label tape
  • overall dimensions are longer and taller
• Embossed size labels
• Includes a modifier mesh for changing infill settings in the “test zone”