Walksnail Avatar HD Pro dual antenna camera pan mount

Lightweight and low profile version of an all in one Walksnail Avatar VTX mount with camera pan ability. Camera can be adjusted up and down. The camera mount press fits onto a 9g metal geared servo output shaft. It is secured with the servo arm screw. VTX mounts with screws provided with VTX using the 20x20mm mounting points. Use 3mm screws to mount the pod, or glue/double-sided tape it to plane. Print the Vehicle Fixture and mount it to the plane and then you can easily interchange to other planes.

I printed with ASA since the VTX does get hot and ASA has good UV resistance. Print with .2 layer height, 4 walls, 4 top and bottom layers and 15% infill. No supports required.

Vehicle fixture has holes for M3x4mm length threaded inserts.

Check out similar version without camera pan ability.

If you need a compact version try this one.