D-Tap Extension Module for Nitze Mini-V-Mount-Plate

This is just a small Bracket for the Alvin's Cables D-Tap splitter designed for the Nitze Mini V-Mount Plate. 

It can be directly screwed on the back with four M3x12 screws. For that the original screws must be removed. It is essential to leave the original metal plate in place and fix the Extension Module on top.

After that the D-Tap splitter can be inserted. For this version it is important to have 3M Dual Lock velcro on the back of the splitter. This happens to be the case, because all my splitters use it. For use without velcro, the model must be modified by ~4mm.

Next up fix the “closer” part with four M3x8 screws. When everything fits tightly you may close up everything with the lid and another four M3x8 screws. If the Adapter still has wigglingroom, shim it to the perfect tightness with tape.

Things you need:

1x Nitze V-Mount Plate
1x Alvin's Cables D-Tap Splitter
    3M Dual Lock Velcro
4x M3x12 Screws
8x M3x8 Screws.
 

Printing info:

Walllayers: 2-3mm
Infill +15%
0,20mm Nozzle
Supports needed for “Closer” and the “Body”