Wall Display / Case for Raspberry Pi with 7inch display

Case for a Raspberry Pi with the original 7inch display. Can be wall mounted or stand on a desk.

I used https://www.printables.com/model/727545-raspberry-pi-4/files to model the case around it. Thank you @print_byte for providing the step file! The display model had been created by me.

Print as shown on its back with minimal supports for the bottom hole. I used a cube to block out supports in other areas. Printed in 0.2mm, PETG, 2 walls.

Display is fixed to the case with 4x short M3 screws.

I've added the Fusion file - feel free to modify as to your likings.