Cable sleeve clip
Clips for 1/4" (about 10mm OD) split cable sleeve. Made for 10mm square bar support.
In the contest Cable Organizers
5
14
1
453
updated January 23, 2022
Description
PDFThis clip is made to work with ¼" split tubing (this kind), which has an OD of about 10mm. The clip then fits with 10mm square section supports (in my case an articulated desk arm).
Printed in PLA it should have just enough flex to work over the 10mm support but still have enough stiffness to prevent coming loose.
Tags
Model origin
The author marked this model as their own original creation.
