6.5 inch rack ZimaBlade

• Click to Read About 6.5 inch and Rack Frame
• 6.5 inch Rack Mount Collection

rack mount design by use 3D Model Resources for IceWhale Products as reference and i dont have device to test this print, use at your own risk

Rack mount

• use M3 screw (4-5mm) and backplate to lock ZimaBlade in place if not fit

2.5 inch hard disk or SSD

• can mount 2 by place on top and require screw on bottom
• not sure about temp if too hot just place one

My print settings

• layer height: 0.2 
• wall: 3
• infill: 15%

If you enjoy my work, please consider support at link in profile.