Power Strip Bed Frame Mount

This print was an update of my original power strip mount, modified to fit a rectangular bed frame without the need for double sided tape.

This was designed parametrically, so you should be able to change the features as needed if it doesn't fit your power strip precisely. 

Printing suggestions: Print with the U profile adhering to the bed. With 20% infill and 10% tree supports, at a print speed of 100 it seems sturdy, however I would recommend increasing this to 30% and a brim for practical use and level printing.

Two designs are provided, the second one has a slightly longer back that extends further for a more rigid design. An update will be provided to add a bottom clip for even more rigidity.

I added additional brackets to be used on a bed frame. This reduces the need for double sided tape and allows it to be adjusted, or can be fixed in place with two pieces of tape.