Filametrix Stealthburner G2E Nitehawk36

I liked hartk's strain relief mount for the reaper and wanted to splice it together with this umbilical mount for the StealthBurner G2E.  I ran into an issue using the Filametrix version due to it not have a mounting hole for one of the screws in the rear body. The official rear body does, but it is incompatible with Filametrix's cutting arm. This remix will allow you to mount the Nitehawk36 to the Filametrix style StealthBurner G2E. An extra heat insert goes into the right side just like the official version. 

Attributions:

https://github.com/IRTrail/G2E-Filametrix

Hartk strain relief on reaper toolhead discord

Combines one of hartk's strain reliefs for the reaper to the profile of this mount. The heat insert hole and the hole for the mount have been shifted left 1mm to accommodate the lack of plastic on filametrix's rear body. Not any kind of board/umbilical mount will work with this rear body. The bottom mounting arm has also been reduced 1mm as to not protrude from the rear body.