Small Cable Clip

Are you tired of even the smallest of cable reeking havoc in your household? Take control of the situation with the Small Cable Clip! The Small Cable Clip is designed to… uh… hold small cables. No more tripping in the middle of the night over speaker cables! No more Roomba exploding over mounds of cables you neglected to subdue! 

HARDWARE: (Either)

• 2 or 2.5 x 10mm (or longer) flat head wood screw
• Foam Tap / VHB

PRINT INSTRUCTIONS
• For screwing the clip in place, position the cable clip in desired location (It is recommended to keep the opened side facing upward if possible. Use a small wood screw to mount the cable clip.
 

• For foam Tape cut a piece about 11mm x 7mm (.5" x .25") and place on backside of bracket. If used on a stubborn surface VHB tape can be substituted.

PRINT SETTINGS:
Filament: PETG or PLA
Nozzle Size: 0.4mm
Print Height: 0.2-0.35mm
Infill: 10-20%