This file contains only the case portion of the model. The lid from the original model should still function.
I'm not a wizard with Fusion360, so the magnet holes were also elongated by this change. To circumvent this problem, I added 6x 25mm pegs, which must be inserted into the magnet holes in order to bring the magnets back to their intended height. BOM for magnets and other accessories in the original description.
Prints without supports in PLA, 2 perimeters, 5% infill.
The author remixed this model.
Added 25mm of height to the box, which adds enough height that the HD drone is comfortable in its cubby with its increased canopy size.