Gojo Lesezeichen Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 50x150mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.8mm

Filaments Used:
PLA Sunlu Meta Black
PLA Sunlu Meta Grey
PLA Sunlu Meta White
This print uses 3 unique filaments

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Grey
At layer #13 (1.12mm) swap to White for the rest.