Jinx Pow-Pow Minigun - Arcane

This is a digital 3D printable model of Jinx Pow-Pow Minigun from Arcane. The drum of the minigun is mounted on an axle, which allows the barrel to rotate when you push it.
 

The download contains:

• STL cut for 200mm printer beds
• STL cut for 360 mm printers
• Whole assembled OBJ file
• Video assembly manual

SIZE
At 100% scale, the model’s dimensions are approximate:
Width 994 mm
Length 268 mm
Height 390 mm
You can scale the model as you wish, but we can’t guarantee that at a much smaller size the model will print well. 

3D PRINTING SETTINGS
We use these settings for most of our prints:
Layer height 0.15 mm
Infill 15%
Supports 45°
For parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.

Printing settings will vary greatly depending on your specific printer.

We try to make the models in a way that uses as little support material as possible.
This model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc. We use hex-pegs (included in the files) that will help you connect the cut pieces of the model. 

Do you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.

This fan-made model was brought to life by 3Demon. We are a group of modeling and 3d printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories, but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here.