ITX NAS/Server Case - 8 bays

Features 🪶

• 8 Easy access 3.5” hard drive bays
• ITX motherboards
• SFX power supply
• Room for a full-height PCIe card

Required parts 🔩

• 7x M4x8 mm screws
• 7x M4 Nuts
• 9x M3x16 mm screws
• 5x M3x6 mm screws
• 15x M3(OD 5mm)x4 mm Brass threaded insert
• 33x M4x10 mm countersunk screws
• 33x M4(OD 6mm)x4 mm Brass threaded insert
• 4x 8 mm PC Case screws
• 8x 6x3 mm Magnets
• 12x PC fan screws
• 1x Jonsbo N3 backplane
• 1x Button
• 1x 120 mm fan filter (Optional)
• 1x 120 mm fan grill (can be 3D printed)

Hardware requirements ⚙

• ITX motherboard
• SFX power supply (max length: 140 mm)
• Up to 8x 3.5” HDDs
• 1x 120 mm fans (max width: 25 mm)
• 2x 92 mm fans or 1x 120 mm fans (max width: 25 mm)

Maximum Hardware Dimensions 🧩

• Max CPU cooler height: 50 mm
• Max PCIe card length: 195 mm
• Max power supply length: 140 mm

Case Dimensions 📏

• Height: 288 mm
• Width: 227 mm
• Length: 241 mm

Printing Recommendations 📌

• Minimum print bed size: 241x219 mm
• Material: PETG, ABS, or ASA (heat-resistant materials recommended)
• Layer height: 0.20 mm
• Wall loops: At least 4, recommended 6
• Top shell layers: At least 5, recommended 7
• Bottom shell layers: At least 4, recommended 6
• Infill: 15 to 25% - Gyroid

Assembly 🔗

All the assembly instructions are in the Assembly.pdf