Speaker Adapter for Toyota Yaris / Vitz (XP13)

I remixed the speaker adapter to use with Toyota Yaris to get a better fit.
With this you can even use the original Socket if you can solder 2 cabels.

For the Yaris XP13 the left upper hole is 0.6° displaced so I rotated this part a little, I thickend the base to 3mm and extruded the upper part to a overall height of 25,5mm
Then I added the cut out for the origninal Socket. You will have to disassemble it from the old original or use the one without the cutout.
I added a groove to add a rain/watershield which will follow later on.

the model is for the left door (if you sit in the car) for the right door you just have to mirror it in your slicer.

So big thanks @Entropy4U for the base model

-Cutout for socket

-thicker base

-higher

-location of mounting hole