Nespresso Storage System

Here is a simple storage system I made to store Nespresso capsules, designed to fit in with the Krups Essenza Mini. 

I was living in quite a small kitchen, so surface space was quite precious. So when I bought a coffee machine, I wanted to make sure it took up as little of the counter as possible. This meant that whatever I designed, I wanted to be able to stack my coffee machine on top the capsule storage. Next to that, I really like the retro styling of the Krups coffee machine, so I wanted to design something that for that aesthetic, or at least didn't clash. I just set up my Mk4, so this was an excellent test of its ability to print larger things. It's not on the level of Scott Yu-Jan or other similarly talented designers, so far Ive been happy with it. 

The full build consists of 3 times the combination of the tray and base, and one time the outer shell. The standard model is a stack of three, but feel free to deviate to your hearts content. 
I have also included the STEP files, so you can modify the trays to also store sugar, creamer, and cups if you want.

I printed my model out of Polyterra PLA with a 0.6 mm nozzle, but the tolerances are loose enough where that or a 0.4 nozzle shouldn't make the difference. 
NOTE: Print out of PETG/ASA/PC if you are keeping it on a hot environment like next to the stove, other high heat appliances or in direct sunlight. As it is intended as an everyday use item, I would recommend against using CF filaments, but the final choice is up to you. It can be made out of PLA, as the coffee machine itself does not generate that much heat, but be careful if its suitable for your user environment. 

I hope you enjoy this model! It has served me surprisingly well, and I hope it can do the same for you!