Hot Wheels to MEGA BLOK adapter - print in place, no supports needed

FIRST MODEL UPLOAD!!!
Use MEGA BLOKS to connect hot wheels tracks and unlock cool ramps, drop-offs, or just build more complex tracks. Print-in-place with no supports needed design! Make sure to orient the design so the hot wheels connector is flat on the print bed (see pictures).

Printed on FF AD5MPro in PLA+ with 0.6mm nozzle, 0.3mm layer height, and 2 walls in 27 minutes using <25 grams of material. There are not really any tolerance constraints, so it should print fine with whatever standard settings / filament you use. Please post makes with printer and settings for others to learn, and let me know if you have any issues, questions or requests!

wooden train connector only allows remix, so license limited to remix only. Sorry. :-/

I took the MEGA BLOKS connector from the wooden train connector and the hot wheels connector piece from the hot wheels clamp and merged them together in FreeCAD using a custom taper to connect them that allows for “no supports” when printing.