Table vise

Update 14.3.2025

• improved lower screws for better durability
• improved threads for easier rotation

Update 28.3.2025

• Extended screws for attaching to the table
• Increased thickness of the main bolt cotter pin

Table vise for table of maximum thicknes 50mm

• Use grease or petroleum jelly for threads.
• The span of the handles is 130mm.
• Mnimum thick of desk is 25mm
• Use rubber or foam tape betwen table and mount for better adhesion.

3D printing settings

• Printed from PETG.
• print settings are written for each stl file
• YES really print Lower Screws in position like on photo for better layer cohesion.

You can also use additional area for vise. Link here