Savannah GrindMaster Sharpening Jig Storage Brackets

I just recently got Savannah GrindMaster sharpening system and needed a way to store all the accessories out of the way. The multi grind jig arm is extremely long and gets in the way when not in use with my 8" bench grinder. The turning tool arm is longer than 24" and extends over both ends of my lathe cart.

This set will hold the arm, the multi grind jig, set up blocks, and platform. I used standard drywall screws, with countersinks and access holes. The Savannah system uses 3/4" square tube, and this should also work with the Wolverine grinding system.

Print as displayed in pictures.

Jig Holder requires supports. 45degree overhang surface holds the Multi grind jig.

Walls : 4

Infill: Gyroid 15%

Material: PETG

Additional hardware:

20mm x 4mm counter sink magnets x 4pcs

Savannah GrindMaster System