REMIX of "Cyclone Dust Collector" - Lower part only!

Name: REMIX of "Cyclone Dust Collector" - Lower part only!
Brand: Printables
SKU: 1223531
Rating: 5 (2 reviews)

.gallery-skeleton { display: none; }

31h 34m

2× print file

0.20 mm

0.40 mm

687.00 g

185

784

updated March 10, 2025

Description

REMIX of "Cyclone Dust Collector" - Lower part only!

Please get the upper part from here:

--------------------------------------

Cool one, made an edit on the lower piece, for no supports on the upper area with the screw holes, and made the base a bit stronger...

I also added my STL's of reductions to HT40mm pipes and seals for the cyclon.

For the seals i used 2mm Foam rubber, 1mm would be better.

The author remixed this model.

REMIX of "Cyclone Dust Collector" - Lower part only!

Please get the upper part from here:

--------------------------------------

Cool one, made an edit on the lower piece, for no supports on the upper area with the screw holes, and made the base a bit stronger.

Use M4 screws and nuts.

I also added my STL's of reductions to HT40mm pipes and seals for the cyclon.

For the seals i used 2mm Foam rubber, 1mm would be better.