ProfBoots Pushrod Models Nut Recess Modification
Small issue with originals corrected nut recess to allow the nut to fit all the way in and be concentric.
0
11
0
41
updated March 9, 2025
Description
PDFOriginal part has a flat bottom. Modified part has the angled bottom.
Model origin
The author remixed this model.
Differences of the remix compared to the original
Original model had a small issue where the nut recess was oriented incorrectly, preventing the nut from inserting into the pushrod all the way, leaving it 0.3mm out of concentricity. While the model does work, the rod will rub inside the walls of the pushrod and it puts some stress on the parts when they are forced into position (Pushrod will be at least 0.3mm out from the carrier it fits into.)
Files attached are for the Mini DIg, Mini Dig Push Blade and Mini Dump, they have the same file names as the originals.
