1/3rd Scale Mini XT22 Stand

Infill Settings And Filament:
Stand Infill: 99%
Use a brim to help make sure your stand parts don't warp!

I printed the stand with Inland PLA+
alternative filaments will work

This stand has gone through some minor updates, otherwise still completely same functionality

Hardware:
I bought an assortment pack of M4 screws but you mainly need:
M4x14 or M4x16 (These go into the intake)
M4x6 (These screw the legs to the pole stop and roof mount)
Use of M4 nuts is recommended so nothing will be loose when assembling

Only difference is being able to see who made the stand