Here's the details
- The case has a depth of 36mm to account for my rotary encoder which is on the taller side. The FreeCAD files are provided for modification of that, but I'm not particularly experienced in design.
- 6x2mm magnets
- Press-fit + super glue
- 26 magnets
- process: do one side. Then, place magnets on top of those magnets and press the second half on top of them if you are worried about orientation.
- Clamps
- They aren't great
- Not recommended / poor design
This model is public domain. If you end up liking this or find value in this upload and are feeling charitable, you can support me here: https://ko-fi.com/gaja0000
Tags
The author marked this model as their own original creation.