Voron Rear Umbilical Entry (Sealed, PG7, CNLINKO)
Umbilical routing through the rear exhaust with an improved chamber seal.
4
49
0
358
updated
April 6, 2025
Description
PDFRemix Details:
- Improved chamber seal, rear panel is now sandwiched between the cover and trim when tightened.
- Bowden entry threaded for a PC4-M10 fitting.
- Added a PG7 Key for easier tightening or removal of PG7 strain reliefs.
Compatibility:
- Intended for 6mm total panel thickness (IE: 3mm panel + 3mm foam).
- Message me on Discord (@motorahead) for change requests or feel free to remix.
BOM:
- Main Cover
- 1mmx6mm foam (260mm min.)
- X2 - M3x5x4 heat insert
- X2 - BHCS M5x14
- X2 - M5 T-Nuts (2020)
- X1 - PC4-M10 fitting (optional)
- X1 - PG7 strain relief or CNLINKO LP-12 connector
- Trim
- 3mmx6mm foam (260mm)
- X2 - SHCS M3x6
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
A remix of @NyxCode_817344 's remix (https://www.printables.com/model/463697-voron-24-umbilical-exhaust-cover).