Criss-Cross Train Track compatible w/ the Lionel Ready-to-Play Train Sets

This is a custom criss-cross train track compatible with the Lionel Ready-to-Play Sets. The criss-cross train track is based on the 2017 Polar Express Lionel Train Set Parts. The track has tack holes to nail it down.

A complete set for the criss-cross setup contains the following part counts: (Qty 1) LR2P_Train_CrissCrossTrack.stl (Qty 4) LR2P_Train_CrissCrossStraightTrack.stl (Note) If you have the base track set and want to do a complete figure 8 you will need 4 additional straight track and 12 additional curve track.

YouTube Video of Track: https://youtu.be/P4dhCZs7ee8

Etsy Listing: https://www.etsy.com/listing/898509048/crisscross-train-track-3d-printed-lionel

Leave a comment if there is a configuration you might like to see, that is not a track already offered by Lionel, and I will see about designing it. This is a design that I am not interested in posting the original models.

20210502: Posted a v2 version of the track that adjusted the height of the track and updated the connector pieces to be more resilient over time.

Print Settings

Printer:

Lulzbot Taz 4 clone

Rafts:

No

Yes

Resolution:

0.2

50%

Notes:

Support Resolution: 1mm